POSITION SENSOR (ASMB)

 

Description

Position sensor utilizing the Hall effect. Output is noise-free differential voltage proportional to the position of a magnetic target.  This series is back biased with the magnet on board.

It is designed to accommodate the automotive under-hood environment and is resistant to temperature extremes, petrochemicals and other automotive chemicals, severe vibration and shock.

The sensor measures 2,2 mm in diameter and 3,7 mm in length. It is available in 600mm wire lengths and custom configurations.

Also available is a sensor signal conditioner that amplifies the sensor signal and removes the large static signal generated by the magnet.  It also provides a digital proximity signal with separately configurable beginning and end trigger points.

  

 

Specifications

Operating Voltage 9-24 Vdc Supply
Current 2 milliAmps
Common Mode Voltage 2.0 to 3.5 Volts
Sensitivity 42mV/ .05mm Max      2mV/ .05mm min
Typ Measuring Distance 42mV/ .05mm max      2mV/ .05mm min
Frequency response 25 kHz
Offset vs. Temperature 0.3 mV/° C
Sensitivity vs. Temp -3 mV/kG/° C
Output  Resistance 800 Ohms
Operating Temperature -40 to +125°C
Storage Temperature -65 to +150°C
Vibration 100g

__________________________________________________________________________

Sensor (Blue Wire)

  

Sensor   (Yellow Wire)

 
Part Number Description
ASMB 470001-* 300mm wire length
ASMB 470002-* 600mm wire length
ASMB 470004-* 1200mm wire length
ASMB 470005-* 1500mm wire length
* Please indicate connector option:  
No Connector Provided: (-0)
Connector Attached: (-1)
Connector Provided Separately: (-2)
(Example: ASMB470002-0)  

 

WCC Main Page

 

  
Part Number Description
ASMB 470010-* 300mm wire length
ASMB 470011-* 600mm wire length
ASMB 470013-* 1200mm wire length
ASMB 470014-* 1500mm wire length
* Please indicate connector option:  
No Connector Provided: (-0)
Connector Attached: (-1)
Connector Provided Separately: (-2)
(Example: ASMB470002-0)  

 

 

1